1 ′′ PEX Stainless Steel Clamp Crimp Ring (P/N 5926): 50-Pack for Cinch Tool
$55.00This 50-pack of 1 ′′ stainless steel crimp rings (p/n 5926) secures Central PEX pipe using a separate cinch tool .
Showing 1–40 of 110 results
-
-
1/4 HP Blower & Motor (P/N 154): 3-Speed Fan Component
$304.30This 1/4 HP blower and motor (p/n 154) features a 3-speed fan for use in various heating system air handlers .
-
110V Plug-In Fan Operating Thermostat (P/N 368)
$113.50This 110-volt, 13.5-amp plug-in thermostat (p/n 368) is used to operate a fan.
-
190 ∘ F High Limit Safety Switch (P/N 192)
$19.00The 190 ∘ F High Limit Switch (p/n 192) is a safety control that opens the circuit upon a rise in temperature.
-
38 ′′ Double Wall Stainless Steel Domestic Water Heat Exchanger (P/N 5600017)
$269.00This 38 ′′ double wall stainless steel heat exchanger (p/n 5600017) uses 3/4 ′′ FIP ports and spiral turbulation for domestic water heating .
-
5 Amp Breaker Rocker Switch (P/N 11220): Classic Edge Power Control
$27.83This rocker switch (p/n 11220) is the replacement off/on switch with an integrated 5 amp breaker for Classic Edge models.
-
5,000 Grain Capacity Water Softener Cartridge (P/N 1310)
$267.92This single-use water softener cartridge (p/n 1310) removes 5,000 grains of hardness, treating up to 500 gallons of water .
-
6 ′′ Stainless Steel HT Chimney Section (P/N 6500004): 4-Foot Length
$255.51This 4-foot, Type HT listed 6 ′′ stainless steel chimney section (p/n 6500004) requires the p/n 6500011 snaplock clamp at each joint .
-
8 ′′ Chimney Conversion Adapter Kit (P/N 6757): For Square Chimney Box Classics
$69.02The p/n 6757 adapter kit allows Classic furnaces with a square chimney box to use the standard 8 ′′ Chimney Extension .
-
Central Boiler 1-HP 3-Speed OEM Blower Fan (208) – 2701 CFM High-Output
$924.60Industrial-grade 1-HP 3-speed blower motor delivering 2701 CFM for Central Boiler outdoor furnaces.
-
Central Boiler 3/4″, Med. Density Braid Rope, (PRICE/FT) Maxim, E-Classis (809)
$2.78 per ftShop the Central Boiler 3/4 Medium Density Braid Rope for seals and coverage. High-quality OEM parts available with fast next day shipping.
-
Central Boiler 8″ x 48″ Stainless Steel HT Chimney Section (P/N 10508)
$295.64This is a Type HT listed, 8 ′′ x 48 ′′ stainless steel chimney section for outdoor use on various Classic, E-Classic, and Classic Edge models .
-
Central Boiler 8932 Snap Action Limit Switch for E-Classic & Edge Doors
$22.82Replacement safety door switch (p/n 8932) for Central Boiler furnaces. Fits Firebox and Reaction Chamber doors.
-
Central Boiler Air Charge Tube
Price range: $154.36 through $196.32Ensure optimal airflow and efficient heating with a genuine OEM stainless steel air charge tube. Select the correct tube for your E-Classic or Classic Edge model.
Select ModelQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Central Boiler Air Intake Assembly for Edge 350/360, 550/560, 750/760, and 960
$131.60Universal OEM air intake assembly compatible with the full range of Central Boiler Edge 350 to 960 models.
-
Central Boiler Annual Maintenance Bundle: 3-Pack Ashtrol & 2-Pack MolyArmor 350
$224.01This complete maintenance bundle includes 3 containers of Ashtrol Firebox pH Modifier and 2 gallons of MolyArmor 350 Corrosion Inhibitor to protect both the firebox and water jacket of your Central Boiler furnace.
-
Central Boiler ASH TROL MC 297 Firebox PH Modifier for Classic & Edge Series
$132.91Central Boiler ASH TROL-MC firebox treatment designed to modify pH levels and prevent corrosion in Classic and Edge models.
-
Central Boiler CL 5693 Dual Fuel Burner Electrode Replacement Assembly (5405)
$265.00A high-quality OEM replacement electrode assembly designed for reliable ignition in Central Boiler CL 5693 Dual Fuel Burners.
-
Central Boiler Classic Edge HDX 960 Combustion Air Tube Replacement Kit (2500684)
$214.95A complete genuine replacement combustion air tube kit designed to improve airflow and efficiency in Classic Edge HDX 960 models.
-
Central Boiler Digital Temperature Controller TS2-110R: Programmable Furnace Heat Management
$131.64This is a direct replacement digital temperature controller for Classic furnaces after s/n 25151, featuring a customizable 10 ∘ operational window .
-
Central Boiler Digital Temperature Controller TS2-110R: Programmable Furnace Heat Management
$101.00This is a direct replacement digital temperature controller for Classic furnaces after s/n 25151, featuring a customizable 10 ∘ operational window .
-
Central Boiler Domestic Water Heater Heat Exchanger Fittings Kit (Standard P/N 2053)
$110.76Standard threaded fittings kit (P/N 2053) for installing a water-to-water heat exchanger onto a domestic water heater.
-
Central Boiler DOOR LATCH Shoulder Bolt (5230) for Classic 4030 & 5036 Cast Doors
$6.92High-strength replacement door latch shoulder bolt for Central Boiler Classic 4030 and 5036 models with cast doors.
-
Central Boiler Edge 560 OEM Combustion Air Tube (2500603) for Enhanced Efficiency
$88.95Genuine OEM replacement combustion air tube for the Central Boiler Edge 560 outdoor wood furnace.
-
Central Boiler Edge HDX 360 High-Efficiency Combustion Air Tube (2500602)
$94.95Essential OEM combustion air tube designed specifically for the Central Boiler Edge HDX 360 outdoor furnace.
-
Central Boiler Edge HDX 360/560 OEM Thermocouple Sensor (2001200)
$121.12Authentic OEM replacement thermocouple designed for precise temperature monitoring in Central Boiler Edge HDX 360 and 560 furnaces.
-
Central Boiler Edge HDX Stepper Motor Assembly (2001241) – Precision Air Control
$63.12Authentic OEM stepper motor assembly for precise air control in Central Boiler Edge HDX furnaces.
-
Central Boiler Firebox Door Insulation for Maxim 250 / M255 P / PE (4050022)
$52.00Replacement firebox door heat shield insulation for Maxim 250, M255 P, and M255 PE models to prevent heat loss.
-
Central Boiler Fuse Holder Mount Kit (P/N 2500489)
$13.95Kit for older Classic models. Includes fuse holder, mounting bracket, fuses, and wire.
-
Central Boiler Fuse Holder Only (P/N 1085)
$8.66Note: This is the replacement Fuse Holder ONLY. It does not include the mounting bracket, fuses, or wire.
-
Central Boiler Isolation Flange
Price range: $58.85 through $89.85Upgrade your system with these isolation flanges, perfect for isolating circulator pumps. Available as complete kits (3/4″ and 1-1/4″) or single flange (1″). Select your required size/configuration.
Select sizeQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Central Boiler Maxim 255 PE Ignitor Replacement Kit (2500298)
$140.13Genuine OEM replacement ignitor kit for Central Boiler Maxim 255 PE pellet furnaces.
-
Central Boiler Maxim Replacement Burn Chamber with Gasket
Price range: $187.95 through $219.95Premium burn chamber and gasket replacement for Central Boiler Maxim models. Ensures optimal efficiency, longevity, and heat retention. Select your Maxim model.
Select ModelQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Central Boiler Maxim Replacement Burner Auger
Price range: $189.90 through $193.25Replacement tapered burner auger for Maxim outdoor wood pellet furnaces. Select your model (M175 or M250/M255). Includes mounting hardware.
Select ModelQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Central Boiler MolyArmor 350 Corrosion Inhibitor – 2 Gallon (2900630)
$103.43Protect your outdoor wood furnace with Central Boiler MolyArmor 350 Corrosion Inhibitor. 2 gallons, reliable and fast shipping.
-
Central Boiler MolyArmor 350 Corrosion Inhibitor – 4-Gallon Case
$206.93This case contains four 1-gallon jugs of MolyArmor 350. Sufficient for treating larger systems or multiple refills.
-
Central Boiler MolyArmor 350 Corrosion Inhibitor 2-Gallon Bundle & Water Test Kit
$135.88Two gallons of MolyArmor 350 corrosion inhibitor paired with a professional water test kit for total furnace protection.
-
Central Boiler Sight Gauge Combo Kit with Heavy-Duty Brass Valve & Hardware
$39.91Premium brass sight gauge assembly kit including valve, cap, and elbow for Central Boiler, WoodMaster, and CleanFire models.
-
Central Boiler Sight Gauge Tube Kit with Protective Cap and Clip
$17.91Clear sight gauge replacement tube with cap and clip for easy water level monitoring on Central Boiler furnaces.
-
Central Boiler Snap Action Door Switch 2-Pack (8932) for E-Classic & Edge Models
$24.88A 2-pack of reliable snap-action door switches for Central Boiler E-Classic and Classic Edge furnace models.