Plumbing Manifold: 1−1/4 ′′ Inlet X 3/4 ′′ Outlet (P/N 1200033-011)
$84.03This manifold (p/n 1200033−011) features one 1−1/4 ′′ inlet and four 3/4 ′′ outlets, measuring 3−1/4 ′′ x 3−1/4 ′′ x 12−1/4 ′′ .
Showing 281–320 of 343 results
-
-
Pre-Wired Airflow ASM, Combustion Fan with Wiring, #700, 6576, 2500390 & 2001046
$252.20The pre-wired Combustion Fan Assembly (p/n 11606) is a replacement for several Classic cast door and steel door draft inducer kits .
-
Push-fit Male Adapter: 1″ x 3/4″ MPT (P/N 612)
$19.90This Push-fit Male Adapter (p/n 612) connects 1″ pipe (Copper, PEX, or CPVC) to a 3/4″ MPT threaded fitting without tools.
-
Radiant Baseboard End Cap – Left Side (P/N 232)
$15.97This p/n 232 is the left-side end cap for trim and finishing radiant baseboard water heaters .
-
Radiant Baseboard End Cap – Right Side (P/N 233)
$15.97This is the replacement right-side end cap (p/n 233) for trimming and finishing radiant baseboard water heaters .
-
Radiant Manifold Kit (Stainless Steel)
Price range: $209.95 through $339.95Stainless steel radiant manifold kits for radiant floor heat systems. Available in 2 to 12 loop configurations. Includes flow meters, isolation valves, temp gauges, air vent, and 1/2″ PEX connectors.
Select LoopsQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Reaction Chamber Thermocouple Sensor: E-Classic & Classic Edge Temperature Control
$164.24This is a replacement thermocouple for the Reaction Chamber temperature sensing on most E-Classic and Classic Edge furnace models .
-
Reducing Hex Bushing (P/N 388): 1−1/4 ′′ x 3/4 ′′ NPT Connector
$7.57This hex bushing (p/n 388) reduces an NPT connection from 1−1/4 ′′ down to 3/4 ′′ .
-
Refractory – Reaction Chamber Door – Classic Edge 750 (P/N 4050035)
$82.25Replacement Reaction Chamber door refractory for Classic Edge 750 models.
-
Relay Kit for Dual Fuel Ready Models (P/N 4528)
$99.00This relay kit (p/n 4528) provides protection for Dual Fuel Ready models (except CL 7260 ).
-
Reliable Gas Firing Control: Gas Ignition Module for E-Classic IR models and Maxim 175/250/255P Models
$125.91The Gas Ignition Module (p/n 2500088) is a replacement electrical control for the gas burners on E-Classic IR and Maxim 175/250/255P Models .
-
Reliable Outdoor Fire Starter Torch (P/N 2900325)
$69.85This torch (p/n 2900325) is designed for easy and reliable fire starting in Classic Edge,E−Classic,and Maxim furnaces .
-
Remote Monitoring Kit, Indoor Temperature Display
$119.00This battery-operated Kit, Indoor Temperature Display provides remote water temperature monitoring via an LCD with a 75 ft cord and convertible Fahrenheit/Celsius display .
-
Replacement Air Filter 10 ′′ x 10 ′′ x 1 ′′ for Fan Convectors (P/N 1938)
$8.35This 10 ′′ x 10 ′′ x 1 ′′ air filter (p/n 1938) is a necessary replacement for 1910,1941,and 1971 fan-forced convectors .
-
Replacement Chimney Tee Cover
Price range: $49.95 through $109.95Replacement stainless steel covers for chimney tees. Available in 10″ and 8″ configurations to fit specific Central Boiler chimney kits.
Select Size/ModelQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Replacement Flue Brush (P/N 398) for E-Classic 2400/Maxim 250/255 P
$24.95This flue brush (p/n 398) is the replacement brush component for cleaning the flue passageways of E-Classic 2400 and Maxim M250/255 P models .
-
Replacement Light Lens Kit W/Gasket (P/N 8113) for CL(E), E-Classic (E)
$12.90This kit provides a replacement lens and gasket (p/n 8113) for the furnace light assembly, but it does not include a light bulb .
-
Replacement Side Air Channel Kit for Classic Edge 350 (P/N 2500212)
$55.97This kit (p/n 2500212) replaces the side air channels on the Classic Edge 350 and includes all necessary mounting hardware .
-
Replacement Side Air Channel Kit for Classic Edge 750 (P/N 2500214)
$74.53This kit (p/n 2500214) replaces the Classic Edge 750 side air channels and includes all necessary hardware .
-
Replacement Steel Door Kit
Price range: $569.95 through $1,037.65Complete replacement steel/stainless steel door kits for Classic and Pallet Burner models. Includes door, heat shields, draft cover, and hardware. Door seal installed. Does NOT include solenoid or handle.
Select Model CompatibilityQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Rocker Switch Power Supply for Classic/E-Classic/Pallet Burner (P/N 6500)
$22.88This is an on−off rocker switch replacement for the power supply on Classic, Pallet Burner, and E-Classic furnaces .
-
Secure Mounting Kit for Large Plate Heat Exchanger (P/N 2500299)
$31.04This mounting kit (p/n 2500299) includes two brackets for wall-mounting large 5×12 Plate Heat Exchangers (40 plates or more) .
-
Secure PEX Fasteners: 1″ Stainless Steel PEX Clamp (Pack of 10)
$45.65This pack of 10 1 ′′ Stainless Steel PEX Clamps (p/n 5000380) is a durable alternative to the 5978 Hose Clamp .
-
Secure Wall Mounting Bracket for 5 ′′ x 12 ′′ Plate Heat Exchangers (P/N 5807-011)
$18.95This bracket (p/n 5807−011) is used to securely mount most 5 ′′ x 12 ′′ plate heat exchangers (30 plates or less) with mounting studs to a wall .
-
Secure Water Distribution: 25 mm PEX Coupling
$5.63This is the specific coupling (p/n 5000462) used for joining two 25 mm Central PEX pipe ends .
-
Secure-Fit Outdoor Venting Clamp, Snaplock, 8″ Chimney, Type Cb
$40.77The 8″ Chimney Snaplock Clamp (p/n 10509) secures sections of the 8″ stainless steel chimney used on most E-Classic models for outdoor applications only .
-
Sight Gauge Elbow Replacement Fittings (P/N 880): 1/4″ – 5 Pack
$26.50This package of 5 1/4 ′′ Elbows (p/n 880) are replacement fittings for the furnace’s water level sight gauge assembly .
-
Sight Gauge Tube Clear Replacement (9/16″ OD x 3/8″ ID)
$4.47This clear tube is the replacement component for the sight gauge, allowing monitoring of the furnace water level.
-
Sight Gauge Tube Clip 5-Pack (P/N 5032)
$2.84This pack of 5 p/n 5032 clips replaces original components to secure the sight gauge tube to the furnace .
-
Sight Gauge Tube Dust Cap (P/N 6146): Essential 10-Pack
$11.44This pack of 10 dust caps replaces the original sight gauge components to keep the water level tube clean .
-
Sight Gauge Water Level Valve 1/4 ′′ Replacement (P/N 846)
$29.92This 1/4 ′′ valve is a direct replacement part used in the water level sight gauge assembly .
-
Solenoid Overload Protection Fuse (P/N 8470): 1 Amp Slow Blow, 5-Pack
$6.92This pack of 5 1−A Slow Blow fuses (p/n 8470) protects the door solenoid from electrical overload in various furnace models .
-
Stainless Steel Chimney Tee Kit
Price range: $198.95 through $724.35Factory-built, Type HT listed stainless steel chimney tee kits. Includes tee cover and rope rings. Silicone not included. Available in 6″, 8″, and 10″ sizes for various Central Boiler models.
Select Size/ModelQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Stainless Steel Hex Nut 10-Pack (P/N 10430): 5/16 ′′ −18 Full Finish
$18.48This is a 10-pack of 5/16 ′′ −18 stainless steel hex nuts (p/n 10430) used for securing furnace components .
-
Stainless Steel Side Air Channel Kit for Classic Edge 550 (P/N 2500213)
$62.88This replacement kit (p/n 2500213) provides the side air channels, including all necessary nuts, bolts, and washers, for the Classic Edge 550 .
-
Stainless Steel Water Level Float Switch (P/N 2500467): E-Classic, Maxim, Edge, Forge
$57.37The stainless steel p/n 2500467 float switch is a universal replacement for monitoring the water level in E-Classic, Maxim, Classic Edge, and Forge models .
-
Taco 00 Series Pump
Price range: $309.95 through $449.95Reliable, maintenance-free circulator pumps for hydronic heating. Available in various models including Bronze (006), Cast Iron (007, 009, 014), and Priority Zoning (007). Choose the model that fits your system requirements.
Select ModelQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Taco 1″ NPT Cast Iron Freedom Flanges (P/N 194): Pair with Hardware
$23.50This pair of 1 ′′ Cast Iron Freedom Flanges (p/n 194) for Taco “00” series circulators includes all necessary nuts and bolts .
-
Taco 3/4 ′′ Cast Iron Freedom Flanges: Easy-Install Pair for 00 Series Pumps
$23.50These 3/4 ′′ Cast Iron Freedom Flanges feature an Easy-On / Easy-Off design for quick installation and fit all Taco 00 Series Circulators (except 0012) .
-
Taco 555-154RP Replacement Power Head: Precision Control for 560 Series Zone Valves
$199.40The Taco 555−154RP is a 24V replacement power head for the Taco Series 560 Zone Valves, featuring improved flow control technology .