Central Boiler DOOR LATCH Shoulder Bolt (5230) for Classic 4030 & 5036 Cast Doors
$6.92High-strength replacement door latch shoulder bolt for Central Boiler Classic 4030 and 5036 models with cast doors.
Showing 81–120 of 344 results
-
-
Central Boiler Double Wall 8 ′′ Chimney Band Clamp (P/N 4518)
$43.40This p/n 4518 band clamp is used to reinforce the strength of joints between two sections of 8 ′′ Central Boiler double wall chimney pipe .
-
Central Boiler Edge 560 OEM Combustion Air Tube (2500603) for Enhanced Efficiency
$88.95Genuine OEM replacement combustion air tube for the Central Boiler Edge 560 outdoor wood furnace.
-
Central Boiler Edge HDX 360 High-Efficiency Combustion Air Tube (2500602)
$94.95Essential OEM combustion air tube designed specifically for the Central Boiler Edge HDX 360 outdoor furnace.
-
Central Boiler Edge HDX 360/560 OEM Thermocouple Sensor (2001200)
$121.12Authentic OEM replacement thermocouple designed for precise temperature monitoring in Central Boiler Edge HDX 360 and 560 furnaces.
-
Central Boiler Edge HDX Stepper Motor Assembly (2001241) – Precision Air Control
$63.12Authentic OEM stepper motor assembly for precise air control in Central Boiler Edge HDX furnaces.
-
Central Boiler Firebox Door Insulation for Maxim 250 / M255 P / PE (4050022)
$52.00Replacement firebox door heat shield insulation for Maxim 250, M255 P, and M255 PE models to prevent heat loss.
-
Central Boiler Fuse Holder Mount Kit (P/N 2500489)
$13.95Kit for older Classic models. Includes fuse holder, mounting bracket, fuses, and wire.
-
Central Boiler Fuse Holder Only (P/N 1085)
$8.66Note: This is the replacement Fuse Holder ONLY. It does not include the mounting bracket, fuses, or wire.
-
Central Boiler Isolation Flange
Price range: $58.85 through $89.85Upgrade your system with these isolation flanges, perfect for isolating circulator pumps. Available as complete kits (3/4″ and 1-1/4″) or single flange (1″). Select your required size/configuration.
Select sizeQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Central Boiler Maxim 255 PE Ignitor Replacement Kit (2500298)
$140.13Genuine OEM replacement ignitor kit for Central Boiler Maxim 255 PE pellet furnaces.
-
Central Boiler Maxim Replacement Burn Chamber with Gasket
Price range: $187.95 through $219.95Premium burn chamber and gasket replacement for Central Boiler Maxim models. Ensures optimal efficiency, longevity, and heat retention. Select your Maxim model.
Select ModelQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Central Boiler Maxim Replacement Burner Auger
Price range: $189.90 through $193.25Replacement tapered burner auger for Maxim outdoor wood pellet furnaces. Select your model (M175 or M250/M255). Includes mounting hardware.
Select ModelQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Central Boiler MolyArmor 350 Corrosion Inhibitor – 2 Gallon (2900630)
$103.43Protect your outdoor wood furnace with Central Boiler MolyArmor 350 Corrosion Inhibitor. 2 gallons, reliable and fast shipping.
-
Central Boiler MolyArmor 350 Corrosion Inhibitor – 4-Gallon Case
$206.93This case contains four 1-gallon jugs of MolyArmor 350. Sufficient for treating larger systems or multiple refills.
-
Central Boiler MolyArmor 350 Corrosion Inhibitor 2-Gallon Bundle & Water Test Kit
$135.88Two gallons of MolyArmor 350 corrosion inhibitor paired with a professional water test kit for total furnace protection.
-
Central Boiler MolyArmor PH Test Kit: Accurate MolyArmor 350 Water Analysis
$31.28This complete test kit provides pH and Molybdate strips for verifying proper water quality in MolyArmor 350-treated systems.
-
Central Boiler Sight Gauge Combo Kit with Heavy-Duty Brass Valve & Hardware
$39.91Premium brass sight gauge assembly kit including valve, cap, and elbow for Central Boiler, WoodMaster, and CleanFire models.
-
Central Boiler Sight Gauge Tube Kit with Protective Cap and Clip
$17.91Clear sight gauge replacement tube with cap and clip for easy water level monitoring on Central Boiler furnaces.
-
Central Boiler Snap Action Door Switch 2-Pack (8932) for E-Classic & Edge Models
$24.88A 2-pack of reliable snap-action door switches for Central Boiler E-Classic and Classic Edge furnace models.
-
Central Boiler Thermocouple (2001294) for Classic Edge HDX 960 & CleanFire 900
$139.95Essential OEM replacement reaction chamber thermocouple for Classic Edge HDX 960 and CleanFire 900 heating systems.
-
Central Boiler Titanium Furnace Water Sample Submission Kit (P/N 2500415)
$14.59This kit provides two bottles, boxes, and labels for submitting required water samples from Central Boiler Titanium furnaces .
-
Central Boiler WoodMaster MolyArmor 350 Corrosion Inhibitor 2 Gallon (2900630)
$103.43WoodMaster branded MolyArmor 350. Provides superior water jacket protection. 2 Gallon pack.
-
Central Boiler/WoodMaster Thermocouple for Edge 760 & CleanFire 700 (2001212)
$136.67Precision OEM replacement thermocouple designed specifically for Central Boiler Edge 760 and CleanFire 700 models.
-
Central PEX 1 ′′ Brass 90 ∘ Elbow Connector (P/N 1334)
$6.27This 1 ′′ brass 90 ∘ elbow (p/n 1334) is used to couple and change the direction of two Central PEX pipe ends .
-
Central PEX 1 ′′ Full Port Ball Valve (P/N 5000557)
$19.20This 1 ′′ full port ball valve (p/n 5000557) is designed to provide full flow control in 1 ′′ Central PEX pipe.
-
Central PEX 1 ′′ Pipe Coupling (P/N 1333): Brass 10-Pack
$38.07This pack of 10 brass couplings (p/n 1333) is used to permanently join two lengths of 1 ′′ Central PEX pipe .
-
Central PEX 1 ′′ to 1 ′′ MIP Adapter 10-Pack (P/N 1324)
$69.99This 10-pack of PEX adapters (p/n 1324) connects 1 ′′ Central PEX pipe to 1 ′′ MIP threaded fittings.
-
Central PEX 1 ′′ to 3/4 ′′ MPT Threaded Pipe 90 ∘ Elbow 10-Pack (P/N 5000531)
$71.96This 10-pack of 90 ∘ brass adapter elbows (p/n 5000531) connects 1 ′′ Central PEX pipe to a 3/4 ′′ MPT threaded pipe .
-
Central PEX 1″ to 3/4″ MIP Adapter 10-Pack (P/N 1330)
$49.57This 10-pack of p/n 1330 PEX adapters connects 1 ′′ PEX pipe to 3/4 ′′ MIP threaded fittings.
-
Chimney Connection Rope Ring (P/N 6000033): 2″ Low Density Braid, 8″ ID
$19.95This 2 ′′ Low Density Braid Rope Ring (p/n 6000033) with an 8 ′′ ID seals the chimney tee connector to the furnace on many models .
-
Chimney Rope Ring (P/N 7632): 3/4 ′′ Braid with 8 ′′ ID
$15.95This 3/4 ′′ Med Density Braid Rope Ring (p/n 7632) with an 8 ′′ ID is a replacement chimney sealing component .
-
Chimney Safety Guy-Wire Band Kit 8″ (P/N 778): Essential Chimney Reinforcement
$48.00This kit (p/n 778) provides a band and instructions for safely stabilizing chimneys in fall zones with guy-wires (not included) .
-
Chimney Support Brace Kit
Price range: $102.90 through $149.95Heavy-duty chimney support brace kits to reinforce strength when multiple chimney sections are used. Available for Classic and Pallet Burner models.
Select Model CompatibilityQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Circuit Protection Fuse (P/N 4501): 3 Amp, 250V, Lead Free 5-Pack
$14.20This pack of 5 3−A fuses (p/n 4501) is used with the fuse holder to protect the furnace’s electrical circuits .
-
CL 7260 & Pallet Burner Chimney Adapter Kit (P/N 10895)
$264.18This adapter kit (p/n 10895) converts CL 7260 and Pallet Burner models to the newer 8 ′′ chimney extension style .
-
CL 7260 1 ′′ Door Seal Rope Kit (P/N 361): 13-Foot Length
$37.94This kit (p/n 361) provides 13 ft of 1 ′′ door seal rope and instructions for CL 7260 models (silicone not included).
-
CL 7260 High Output Draft Inducer Fan Kit (P/N 5549/2500640)
$388.87This kit bolts onto the draft hood to provide a high output of 450 cfm for the CL 7260 (and similar models), but requires a 5−A fuse .
-
Classic / Pallet Burner Dual Fuel Selector Switch Assembly (P/N 2500408)
$197.22This assembly (p/n 2500408) replaces the selector switch, contact block, and knob for the Dual Fuel system on Classic/Pallet Burner models .
-
Classic / Pallet Burner Spring-Assisted Damper Linkage Kit (P/N 2500053)
$23.92This spring-assisted linkage kit (p/n 2500053) connects the solenoid to the damper control on Classic/Pallet Burner models and includes cotter pins .