Classic 4030, 5036, 6048 Stainless Steel Draft Door Lid Replacement
$22.91This is a stainless steel draft door lid replacement for Classic 4030, 5036, and 6048 models to regulate airflow .
Showing 121–160 of 344 results
-
-
Classic 7260 Dual Fuel Draft Inducer Kit W/ Fuses (P/N 6576)
$423.24This kit (p/n 6576) is the draft inducer assembly for the CL 7260 Dual Fuel cast door model, requiring a 5−A fuse for operation .
-
Classic Chimney Slide Cover Replacement (P/N 983-011)
$21.47This black slide plate (p/n 983−011) is the replacement chimney cover for older CL 17/40 and $mathbf{Classic~4436~&~5648}$ models .
-
Classic CL40/50/60 Chimney Tee Burn Rate Restrictor Kit (P/N 10970)
$49.02This kit (p/n 10970) installs in the chimney tee of CL 4030, CL 5036, and CL 6048 models to lower the furnace burn rate .
-
Classic Edge 350 Front Air Channel Kit (P/N 2500292): S/N G300479 and Up
$62.88This p/n 2500292 replacement front air channel kit is for Classic Edge 350 models with serial numbers G300479 and up .
-
Classic Edge 350 Heat Exchanger Protection & Insulating Kit (P/N 2500249)
$200.16This kit (p/n 2500249) includes the cover, seal, rope, hardware, and heat shields for insulating the Classic Edge 350 heat exchanger .
-
Classic Edge 350/550 Primary Intake Solenoid Spring (P/N 5000031)
$6.63This replacement primary intake spring (p/n 5000031) is for Classic Edge 350/550 models using solenoids with steel elbows.
-
Classic Edge 550 Front Air Channel Kit (P/N 2500239): Pre-G501253 Models
$97.20This front air channel kit (p/n 2500239) is a replacement part for specific Classic Edge 550 models built before s/n G501253.
-
Classic Edge 550 Heat Exchanger Insulation & Shield Kit (P/N 2500250)
$194.44This kit (p/n 2500250) includes the cover, seal, rope, hardware, and heat shields for insulating the Classic Edge 550 heat exchanger .
-
Classic Edge 750 Bypass Door Safety Alarm Kit (P/N 2500153)
$146.54This kit (p/n 2500153) adds an alarm to Classic Edge 750 models that sounds when the bypass door is open.
-
Classic Edge 750 Front Air Channel Kit (P/N 2500240): Pre-G700958 Models
$97.20This p/n 2500240 replacement front air channel kit is for Classic Edge 750 models with serial numbers prior to G700958 .
-
Classic Edge 750 Front Air Channel Kit (P/N 2500294): S/N G700958 and Up
$67.45This p/n 2500294 replacement front air channel kit is for Classic Edge 750 models with serial numbers G700958 and up .
-
Classic Edge 750 Heat Exchanger Protection & Insulating Kit (P/N 2500251)
$331.73This kit (p/n 2500251) provides the heat exchanger covers, seal, rope, shields, and hardware needed for insulating the Classic Edge 750 heat exchanger .
-
Classic Edge Air Channel Washer 10-Pack (P/N 3102334)
$9.68This is a 10-pack of 12GA 409SS washers (p/n 3102334) used for securing the air channel assemblies on Classic Edge models .
-
Classic Edge Controller-Side LED Light Kit (P/N 2500144)
$97.92This LED light kit (p/n 2500144) adds a light beneath the eave on the controller side of Classic Edge furnaces for nighttime visibility .
-
Classic Edge Door Rope Seal (7/8″) By the Foot for Refractory and Covers
$3.69This 7/8 ′′ rope seal (p/n 7674) is for Classic Edge seals (refractory, ash pan, or cover), sold by the foot with cutting required.
-
Classic Edge Pump Panel Latch Replacement (P/N 5000446-SP)
$9.02This is a replacement latch (p/n 5000446−SP) used to secure the pump panel on all Classic Edge outdoor furnace models .
-
Classic Edge Refractory Slot Scraper Attachment (P/N 2500198)
$20.17This scraper attachment (p/n 2500198) connects to the Cleaning Rod (p/n 9439) for cleaning the refractory slot .
-
Classic Edge Solenoid Model FireStar II Controller (P/N 2000540-SP)
$628.06This is the replacement p/n 2000540−SP FireStar II Controller designed for Classic Edge models that utilize solenoids .
-
Classic Flat Front Door Draft Inducer (P/N 700): For S/N 19126 and Later
$289.91The p/n 700 draft inducer is a direct replacement for Flat Front Door Classic models with s/n 19126 and later .
-
Classic Furnace 8 ′′ Chimney Weld Ring (P/N 1200037)
$48.00The p/n 1200037 8 ′′ chimney ring is a weld-on component required for Classic furnaces with a square chimney box .
-
Classic Furnace Ash Removal Shovel (P/N 299/1970)
$37.10This shovel (p/n 299/1970) is the essential tool used for removing ashes from the furnace .
-
Classic Furnace Digital Controller Solid State Relay Kit (P/N 4527)
$118.87This solid state relay kit (p/n 4527) provides necessary electrical protection for the Digital Temperature Controller (p/n 2000155) on older CL 4030,5036,6048,and 7260 Classic models .
-
Classic Furnace Side Draft Inducer Kit (P/N 400): Pre-S/N 13428 Models
$285.96This side draft inducer kit (p/n 400) bolts to the existing draft hood for Classic models up to s/n 13427 and requires a 5−A fuse .
-
Classic Model Long Metal Ash Rake (P/N 300)
$58.95This long, metal-handled ash rake (p/n 300) is used to pull coals forward and stir ashes in Classic furnaces .
-
Classic Outdoor Furnace Replacement Vent Cap (P/N 320)
$22.95This replacement vent cap for Classic outdoor furnaces helps minimize water loss through the vent pipe .
-
Classic Pre-2000 Damper Solenoid (P/N 167): 1-5/8″ Center-to-Center
$57.39This door damper solenoid (p/n 167) with 1−5/8 ′′ bracket holes is specifically for pre−June 2000 Classic furnace models.
-
Classic Recessed Cast Door Draft Door Lid (P/N 444)
$24.33This draft door lid (p/n 444) is the replacement for recessed cast door Classic models (17,40,4436,5648) with serial numbers 13428 to 19125 .
-
Classic Ripple Front Door Draft Inducer Kit (P/N 500): For S/N 13428 to 19125
$285.96This Draft Inducer Kit (p/n 500) provides 180 cfm of air, bolts to the existing draft hood, and is for Ripple Front Door Classic models s/n 13428 to 19125.
-
Classic Titanium Flat Front Steel Door Draft Inducer Kit (P/N 2500390)
$300.15This Draft Inducer kit (p/n 2500390) bolts to the draft hood mount to provide air for combustion on Classic Titanium 4030/5036/6048 steel door models .
-
Combustion Fan Assemblies & Kits
Price range: $139.95 through $689.95Replacement combustion fans for Central Boiler and Maxim furnaces. Available as Fan Assemblies (fan with connectors) or complete Kits (fan, gaskets, decals). Select the correct model for your furnace.
Select Type/ModelQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Complete 50K Btu Fan Coil Unit Heat Exchanger (P/N 2900544)
$452.94This 50K Btu fan coil unit (p/n 2900544) is a complete system including a fan, coil, housing, and louvers, with a range of 20k−50k Btu.
-
Complete Water Test Kit for Non-MolyArmor Systems: Protect Your Outdoor Furnace
$49.92This complete water test kit, which replaces older kits p/n 405 and 597−SP, is used to monitor inhibitor and antifreeze levels for essential system protection.
-
Component for Suspended Space Heater (220k Btu): Space Heater Fan Blades, 220K
$46.78The Space Heater Fan Blades (p/n 851) are a part needed to build a 220k Btu Suspended Space Heater (assembled size approx. 26 ′′ ×24 ′′ ×20 ′′ ) .
-
Copper Female Adapter 1 ′′ Sweat X 3/4 ′′ FIP (P/N 164)
$20.04This copper female adapter (p/n 164) connects a 1 ′′ sweat copper pipe to a 3/4 ′′ FIP threaded fitting.
-
Domestic Water Heater Plate Exchanger Threaded Fittings Kit (P/N 2500013)
$256.71This fittings kit (p/n 2500013) uses threaded ports to install a plate heat exchanger (sold separately) onto a domestic water heater.
-
Domestic Water Heater Push-Fit Fittings Installation Kit (P/N 9263)
$229.91This kit (p/n 9263) provides push-fit fittings for installing a separate water-to-water heat exchanger onto a domestic water heater .
-
Door Handle Bushing Repair Kit for Classic CL 4030 & CL 5036 Cast Doors
$21.91This kit replaces the door handle shouldered bolt with a bushing and longer-threaded bolt on CL 4030 or CL 5036 cast firebox doors .
-
Door Seal Kit (Classic Edge/E-Classic)
Price range: $56.95 through $71.95Door seal kits for Classic Edge and E-Classic outdoor furnaces. Includes silicone-coated fiberglass rope and black silicone adhesive. Select the kit based on your specific furnace model.
Select Model CompatibilityQuick ViewThis product has multiple variants. The options may be chosen on the product page -
Door Seal Kit (Classic/Forge)
Price range: $29.95 through $39.95Door seal kits for Classic and Forge outdoor furnaces. Includes silicone adhesive and rope cut to length. Select the kit for your specific model.
Select Model CompatibilityQuick ViewThis product has multiple variants. The options may be chosen on the product page